Gland plates-for cables without connectors
PRODUCT AND SERVICE Industrial 4.0 Components ICOTEK cable conduit system Back
KEL-DPU entry plates are designed to route and seal cables without connectors (from 3.2 mm to 20.5 mm in diameter) in limited space with IP66 / IP68 / up to UL type 4X ratings.
The KEL-DPU is particularly characterised by its solid robust frame and the increased strain relief of the routed cables.
The KEL-DPU 24 matches exactly the cut-out dimensions of 24-pin standard industrial connectors. For optional screw assembly just pierce the membranes on the integrated screw holes with the screw itself.
The assembly of the KEL-DPU with cables or pneumatic hoses can be done quick and easy. Simply make a small hole in the thin membrane and push the cables through.
ST-B Plugs can be used for sealing pierced membranes if cables have been removed.

-Snap or screw mounting possible
-High strength & stability
-High strain relief
-Fast and easy assembly
-High cable density
-Dual cable sealing with IP66/IP68/up to UL type 4X
-Hygienic design - free of dirt-collecting recesses

IP rating: IP65, IP66, IP67, IP68
UL Type: 4X, 12
For wall thickness: 1.5 - 2 mm
Material: Elastomer
Material base frame: Polypropylene
Colour: grey (similar RAL 7035)
Flame class: UL94-V0, self-extinguishing
Temperature (°C): -40 - 100 °C (static)
Properties: Halogen free, Silicone free
Mounting type: Screw type mounting, Snap-in
No. of screw holes: 4
Diam. of screw holes: Ø 5.8 mm

Beijing Green Century Technology Co., Ltd.

Adress:17 Floor, Building 61, yuanyangshangwu, Balizhuangxili, Chaoyang District, Beijing



Service Hotline



  • 版权所有©2014光华世通    京ICP备09061829号-1