Gland plates-for cables without connectors
PRODUCT AND SERVICE
Back KEL-DP Round series
Advantages
KEL-DP entry plates are designed for routing cables without connectors.
The KEL-DP products are a cost saving alternative to traditional cable glands.
Simply make a small hole in the thin membrane and push the cables through. The KEL-DP round provides protection IP65 / UL type 12.
ST-B Plugs can be used for sealing pierced membranes if cables have been removed.
A special rib ensures a centred fit in the cut-outs.
-Fast and easy assembly, no tools required
-High cable density
-Very good strain relief on the cable bundle
-Cost-effective
-For wall thickness 1.5 - 4 mm
-Hygienic design - free of dirt-collecting recesses
The KEL-DP products are a cost saving alternative to traditional cable glands.
Simply make a small hole in the thin membrane and push the cables through. The KEL-DP round provides protection IP65 / UL type 12.
ST-B Plugs can be used for sealing pierced membranes if cables have been removed.
A special rib ensures a centred fit in the cut-outs.
-Fast and easy assembly, no tools required
-High cable density
-Very good strain relief on the cable bundle
-Cost-effective
-For wall thickness 1.5 - 4 mm
-Hygienic design - free of dirt-collecting recesses
Specifications
IP rating: IP65
UL Type: 12
Material: Elastomer
Colour: grey (similar RAL 7035)
Flame class: UL94-V0, self-extinguishing
Temperature (°C): -40 - 100 °C (static)
Properties: Halogen free, Silicone free
Mounting type: Snap-in
UL Type: 12
Material: Elastomer
Colour: grey (similar RAL 7035)
Flame class: UL94-V0, self-extinguishing
Temperature (°C): -40 - 100 °C (static)
Properties: Halogen free, Silicone free
Mounting type: Snap-in
